 +86- 18795768688             
You are here: Home » News » Spinning machine suction cleaning machine maintenance and troubleshooting

LATEST NEWS

CONTACT US

   +86-18795768688 
  398673152 
    william781208
  +86-18795768688 
    Zuo Yanggou

EMAIL T0 US

Spinning machine suction cleaning machine maintenance and troubleshooting

Views:1     Author:Site Editor     Publish Time: 2019-07-29      Origin:Site

Spinning machine suction cleaning machine maintenance and troubleshooting-Nantong Huipei New Material Technology Co., Ltd.

The new cleaning machine of the spinning frame can be used with the textile machinery that needs to be blown and cleaned by various specifications of the spinning frame. The reciprocating inspection of all parts of the textile machine can eliminate the flying flowers and inhibit the accumulation of dust and reduce the adhesion caused by the flying flowers. It is an ideal equipment to improve and optimize the production environment and improve production efficiency by cutting off the yarn, smashing and weaving, improving product quality, replacing artificial automatic patrol cleaning work, reducing the cleaning workload of workers and increasing the blocking machine. With the continuous updating of spinning equipment, the new cleaning machine for spinning machines has been widely used. There may be such problems in use, how to solve these problems? Below we explain the matters needing attention in the use of blowing and cleaning: 1. In order to ensure the normal operation of the motor and prolong the life, the waste cotton attached to the motor casing and the fan cover should be cleaned in time to ensure sufficient cooling of the motor; There is enough blowing air volume, and the cotton suction box of the cleaning machine should be cleaned and cleaned in time; 3. During the running process of the cleaning machine, there should be no obstacles affecting its normal operation, otherwise it will cause adverse consequences. 4. For the workshop with high humidity and sprinkler on the ground, the suction filter should be cleaned and cleaned frequently, otherwise the filter plugging will affect the cleaning effect. 5. If there is abnormal noise or other abnormality during the operation of the cleaning machine, stop immediately. After the cause is repaired and the test is run, the vehicle can be operated again.

Spinning machine suction cleaning machine

The common faults and elimination of the blower cleaning machine, the motor does not turn (silent). The reason may be that the power line is broken or the winding is burnt. The troubleshooting method is to check if the power cord needs to be replaced and check if the winding needs to be repaired. The reason why the motor does not turn (sound) may be that the bearing is damaged or the winding is faulty. The method of replacement can be to replace the bearing or to see if the winding needs to be repaired. The reason for the small wind pressure may be that the blade is damaged, the speed is too low, or the air inlet filter may be dirty. The method of replacement can be used to find out the cause, replace or clear the foreign object and check the bearing, and replace or clean it when necessary. In the industrial production process, the process requirements will increase the air volume and reduce the air volume. The spinning machine is a good equipment for increasing and decreasing the air volume. It has a wide range of uses. In the development process, the spinning machine is used to blow the cleaning machine. There are many types of types, and there are different classifications according to their use occasions and characteristics. Users must look for the brand when they choose.

Spinning machine suction cleaning machine

a. The cleaning machine runs smoothly, the reversing direction should be sensitive, and the nylon belt does not rub against the shift fork. b. The air volume of each mouthpiece should be appropriate, and the mouthpiece should be exchanged at the same time. c. Whether the waste cotton on the filter net in the cover is sucked or not. When sucking the waste cotton, the two dampers on the blow pipe should be flexible. Sixth, repair and maintenance 1, every half a month to clean the cleaning machine once. 2. Check the nylon belt tightness once a month. When the nylon belt is found to be slack, adjust the position of the passive belt with the tensioning mechanism. If necessary, cut the belt and re-bond. 3. Clean the nylon filter inside the machine every 3 months. 4. The fly flower recovered from the outer suction cotton collection box should be regularly removed according to the condition of the spinning yarn. Generally, it should be no less than twice per shift. Otherwise, the filter net in the cleaning machine will not be cleaned, and the air intake will be reduced. .6, electrical components, according to the line diagram to connect the power cord and motor leads, facing the drive transmission wheel, the motor rotation direction is clockwise. The cleaning machine can be controlled separately or in conjunction with the textile mainframe. 7. Assembly of blowing suction pipe and blowing nozzle: There is a flat suction port in the lower part of the suction pipe, the center position can be adjusted, and the distance from the suction port to the suction point is 10-30mn. The blowing nozzle on the blowing pipe should be assembled on the surface without ribs (note that the position of the hole is symmetrical with the ribs on both sides), punching or scribing the diameter of the cutter 20-diameter 32 round holes, the number of mouthpieces and the size of the mouthpiece according to The corresponding machines are selected accordingly. V. Test the car Before the test run, check whether the components are assembled correctly and the screws are tight. Wipe off the oil on each part to avoid sticking the fly. After turning on the power according to the electrical schematic, first test if the motor is turning. After the cleaning machine is installed as required, manually pull the belt, check that the transmission components should be flexible, the commutation should be reliable, then drive the test run and observe.

Spinning machine suction cleaning machine

Wipe off the oil on each part to avoid sticking the fly. After turning on the power according to the electrical schematic, first test if the motor is turning. After the cleaning machine is installed as required, manually pull the belt, check that the transmission parts should be flexible, the commutation should be reliable, then drive the test run, and observe: a, the cleaning machine runs smoothly, the reversing should be sensitive, the nylon belt does not match the fork Friction occurred. b. The air volume of each mouthpiece should be appropriate, and the mouthpiece should be exchanged at the same time. c. Whether the waste cotton on the filter net in the cover is sucked or not. When sucking the waste cotton, the two dampers on the blow pipe should be flexible. Sixth, repair and maintenance 1, every half a month to clean the cleaning machine once. 2. Check the nylon belt tightness once a month. When the nylon belt is found to be slack, adjust the position of the passive belt with the tensioning mechanism. If necessary, cut the belt and re-bond. 3. Clean the nylon filter inside the machine every 3 months. 4. The fly flower recovered from the outer suction cotton collection box should be regularly removed according to the condition of the spinning yarn. Generally, it should be no less than twice per shift. Otherwise, the filter net in the cleaning machine will not be cleaned, and the air intake will be reduced. .


QUICK LINKS

CONTACT US

   +86-18795768688 
  398673152 
    william781208
  +86-18795768688 
    Zuo Yanggou

SUBSCRIBE

Be the first to know about our lastest products

南通慧培新材料科技有限公司  苏ICP备18008803号